Jual Portable Wine Must and Grape Juice pH Meter Hanna – HI99111

SPESIFIKASI : Portable Wine Must and Grape Juice pH Meter Hanna – HI99111

DETAIL

 

Features at-a-glance

  • Waterproof – The HI99111 is a waterproof meter rated IP67 for immersion in up to one meter of water for 30 minutes.
  • Automatic Calibration – One or two-point calibration is automatic to two selectable buffer sets.
  • Automatic Temperature Compensation – An integrated temperature sensor allows for automatic temperature compensation of pH measurements.
  • Multi-Level LCD Display – The split-level LCD displays both pH and temperature readings, along with indicators for reading stability, battery percentage, and calibration instructions.
  • On-Screen Tutorial – Clear tutorial messages and directions are available on-screen to quickly and easily guide users through setup and calibration.
  • Battery Error Prevention System – The meter will automatically shut off if there isn’t enough power to obtain an accurate measurement.
  • Battery Life Indicator – The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.
pH Range -2.00 to 16.00 pH; -2.0 to 16.0 pH
pH Resolution 0.01 pH; 0.1 pH
pH Accuracy ±0.02 pH; ±0.1 pH
pH Calibration automatic, at one or two points with two sets of buffers (standard 3.00, 7.01,10.01 or NIST 3.00, 6.86, 9.18)
pH Temperature Compensation automatic from -5.0 to 105.0ºC (23 to 221ºF)
pH CAL Check (electrode diagnostics) probe condition indicator
mV Range ±825 mV (pH-mV)
mV Resolution 1 mV (pH-mV)
mV Accuracy ±1 mV (pH-mV)
Temperature Range -5.0 to 105.0°C / 23.0 to 221.0°F
Temperature Resolution 0.1°C / 0.1°F
Temperature Accuracy ±0.5°C (up to 60°C); ±1.0°C (outside) / ±1°F (up to 140°F); ±2.0°F (outside)
pH Electrode FC10483 pre-amplified pH probe with internal temperature sensor, quick connect DIN connector and 1 m (3.3’) cable (included)
Automatic Shut-Off user selectable: after 8 min, 60 min or disabled
Battery Type/Life 1.5V (3) AAA / approximately 1400 hours of continuous use
IP Protection IP67
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)
Weight 195 g (6.91 oz.)
Ordering Information HI99111 is supplied with FC10483 pH/temperature probe, pH 3.00 and pH7.01 calibration buffer sachets, HI700635 cleaning solution for wine deposits sachet (1), HI700636 cleaning solution for wine stains sachet (1), 100 mL beaker, batteries, instruction manual, calibration certificates for meter and probe, and rugged carrying case.

 

 

 

Deskripsi

Jual Portable Wine Must and Grape Juice pH Meter Hanna – HI99111

DESKRIPSI : Portable Wine Must and Grape Juice pH Meter Hanna – HI99111

Hanna Instruments HI99111 adalah alat pengukur pH dan suhu yang tahan lama, tahan air, dan portabel yang dirancang khusus untuk pengukuran jus termasuk jus anggur dan anggur. Kalibrasi otomatis dilakukan pada satu atau dua titik dengan dua set buffer. Buffer kalibrasi mencakup titik kalibrasi pH 3,00 dan bukannya pH 4,01 untuk meningkatkan nilai pH yang diharapkan. Semua pembacaan kalibrasi dan pengukuran dikompensasi secara otomatis untuk variasi suhu. LCD split-level menampilkan pembacaan pH dan suhu, bersama dengan indikator untuk stabilitas pembacaan, persentase baterai, dan instruksi kalibrasi. The HI99111 menggunakan FC10483 kaca tubuh, elektroda pH diperkuat yang menawarkan banyak fitur yang meningkatkan pengujian pH untuk berbagai jus dengan konten padatan tinggi.

CPS

pH elektroda dengan Teknologi CPS
Otomatis, satu atau dua titik kalibrasi

Kalibrasi satu atau dua poin otomatis
Tahan air

Tahan air

DETAIL

Features at-a-glance

  • Waterproof – The HI99111 is a waterproof meter rated IP67 for immersion in up to one meter of water for 30 minutes.
  • Automatic Calibration – One or two-point calibration is automatic to two selectable buffer sets.
  • Automatic Temperature Compensation – An integrated temperature sensor allows for automatic temperature compensation of pH measurements.
  • Multi-Level LCD Display – The split-level LCD displays both pH and temperature readings, along with indicators for reading stability, battery percentage, and calibration instructions.
  • On-Screen Tutorial – Clear tutorial messages and directions are available on-screen to quickly and easily guide users through setup and calibration.
  • Battery Error Prevention System – The meter will automatically shut off if there isn’t enough power to obtain an accurate measurement.
  • Battery Life Indicator – The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.
pH Range -2.00 to 16.00 pH; -2.0 to 16.0 pH
pH Resolution 0.01 pH; 0.1 pH
pH Accuracy ±0.02 pH; ±0.1 pH
pH Calibration automatic, at one or two points with two sets of buffers (standard 3.00, 7.01,10.01 or NIST 3.00, 6.86, 9.18)
pH Temperature Compensation automatic from -5.0 to 105.0ºC (23 to 221ºF)
pH CAL Check (electrode diagnostics) probe condition indicator
mV Range ±825 mV (pH-mV)
mV Resolution 1 mV (pH-mV)
mV Accuracy ±1 mV (pH-mV)
Temperature Range -5.0 to 105.0°C / 23.0 to 221.0°F
Temperature Resolution 0.1°C / 0.1°F
Temperature Accuracy ±0.5°C (up to 60°C); ±1.0°C (outside) / ±1°F (up to 140°F); ±2.0°F (outside)
pH Electrode FC10483 pre-amplified pH probe with internal temperature sensor, quick connect DIN connector and 1 m (3.3’) cable (included)
Automatic Shut-Off user selectable: after 8 min, 60 min or disabled
Battery Type/Life 1.5V (3) AAA / approximately 1400 hours of continuous use
IP Protection IP67
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)
Weight 195 g (6.91 oz.)
Ordering Information HI99111 is supplied with FC10483 pH/temperature probe, pH 3.00 and pH7.01 calibration buffer sachets, HI700635 cleaning solution for wine deposits sachet (1), HI700636 cleaning solution for wine stains sachet (1), 100 mL beaker, batteries, instruction manual, calibration certificates for meter and probe, and rugged carrying case.